Donadoni

Yew lamination 45 x 0,6mm x 70cm

Yew lamination for recurvemacking, arge 45mm = 1¾", thick 0,6mm = .024", long 70cm = 27".

This wood lamination with parallel thickness has to be glued between two fiberglass laminations with the proper epoxy glue to make a bow. the number and thickness of these laminations between the fiberglass ones make the bow weight
To get the wished bow weight at first try result pretty difficoult because it depends from many factors: Bow lenght, bow line and shape, gluing pressure and technique and the total thickness that we can change by modify the number and thickness of wood laminations.
At the end, also the limbs large is rilevant and by wary it we can adjust the bow weight.

Just to give an approssimative idea, each tenth of millimeter could means a pound about.

About the bow performances, the wood type has no effect at all but on its beauty and overall walue, it matters a lot. Yew represent one of the most prestigious choiche because it nice red color and fancy veins and also because it became a must in the middle eage Europe for longbowmacking. To place two of these thin laminations just under the clear fiberglass and other wood in between could be a perfect choice also used by many professional bowyers.

This laminations are perfectly dried and the surfice is ready for gluing. Avoid to wet and durty them to get a perfect result.

MADE IN ITALY.


1,72 €

Contact us

Our hotline is available 24/7

PayPal