Donadoni

Black fiberglas 1 x 45mm at m.

Black fiberglass stripe to make high performance recurves,1,00mm = .040" thickness, 45mm = 1¾" large, sold by meter. You can order as many meter you wish to receive an entire coil to minimize the waste. If you order also wood laminations of 170cm, it could be good to cut the fiberglas in same length so to make a unique stronger package. Let us know in the NOTE your preference about.

This Bowmacking fiberglass is made in Finland and has the best relation as amout of uniderectional and trasversal fibers to provide the best performance and strength. As for my personal experience this fiberglass provide best arrowspeed performance then others.

The lamination has a matt side and a sanded one to provide a perfect gluing. Pay attention to not touch this side by nacked hands since it may injury and could be grease by hand. This side mast remain clean and dry to provide the best bonding. Allways wear gloves to handle it.

The sanded side is the one to glue with wood to make a "SANDWICH" lamination: fiberglass-wood-fiberglass. By vary the wood laminations number and thickness you may obtain different bow weigth, consider about one pound each tenth of millimeter = .004"

This lamination is just same at clear one but colored. We keep less quantity since it is not much requested and for this reason we don't offer quantity discount.

MADE IN FINLAND


7,90 €

Contact us

Our hotline is available 24/7

PayPal